ACCESS DOORS

Figure 34-Front Access Door Latch

FRONT ACCESS DOOR REPLACEMENT

REMOVAL

1 . On outboard side of door remove two nuts and bots retaining support to door.

2. Remove nuts and bolts retaining hinge to body.

3 . Remove access door.

INSTALLATION

1 . Postion access door in body opening and install hinge retaining nuts and bolts to body .

2. Position access door support to access door and secure with nut and bolt.

REMOVAL EXTERNAL UTILITIES COMPARTMENT DOOR

REPLACEMENT

1 . Drill out four pop-rivets holding piano hinge to body (See figure 35).

2. Remove door. Door may be removed from hinge by drilling out four pop-rivets retaining door to hinge.

INSTALLATION

Position door and hinge assembly in its opening and pop-rivet door in place.

Figure 35-External Utilities Compartment Door

LP GAS, OR STORAGE DOOR REPLACEMENT

Both LP gas door and the storage (or motor generator) door are removed and installed in the same manner.

REMOVAL

1 . With the access door closed drill out pop rivets that retain the hinge to the body.

2. Unfasten latches and remove door.

INSTALLATION

1 . Position door in its opening.

2. Pop rivet hinge to body.