SEATS

DRIVER AND SINGLE PASSENGER SEAT

The seat assembly can be removed by itself or as a unit with pedestal assembly.

SEAT REMOVAL

1. Swivel chair to a 45° position.

2. This will allow access to the four retaining bolts. Remove four bolts (See figure 39).

3. Remove seat.

SEAT INSTALLATION

1. Swivel top of pedestal to allow access to seat mounting holes.

2. Position spacers and install retaining bolts to weld nuts in base of seat . Tighten securely.

Figure 39-Seat Attaching Bolts

PEDESTAL REPLACEMENT

REMOVAL

1. Remove seat as described above.

2. Remove twelve nuts and bolts from base of pedestal. (Access to nuts can be made through the engine access cover)

3. Remove pedestal.

INSTALLATION

1. Position pedestal over mounting holes.

2. Install nuts and bolts to retain pedestal.

3. Install seat as described previously in this section.

.

DUAL PASSENGER SEAT REPLACEMENT

The dual passenger seat is removed in the same manner as the driver and single passenger seat, refer to the preceding procedures for removal and installation.

The pedestal for the dual passenger seat is also removed by the same method as the driver and single passenger seat pedestal.